Mobile Internet has long been an integral part of our daily life, but sometimes even in your own flat, you can face the problem of a weak or completely lost signal.
The reasons may be different: network congestion, remoteness of the operator’s towers, or even the peculiarities of the building layout. One of the key factors is the influence of building materials that can block radio waves. So, what materials can block cell phone signals, and what are the main reasons for a poor mobile signal in a flat? This article will tell you about it.
Why Does Mobile Internet Disappear in a Flat?
Many users face problems when mobile Internet suddenly disappears from their flats. This can cause inconvenience and limit access to the most important information online. The occurrence of such a problem can be associated with several factors:
Location of the flat. One of the main reasons for the loss of mobile Internet in a flat is its distance from the nearest mobile tower. If your flat is too far from the tower or is closed by thick walls and barriers, the mobile Internet signal can significantly weaken or disappear altogether.
Electromagnetic interference. Another common reason is the presence of various electronic devices in the flat that can create electromagnetic interference. Such interference can distort the mobile Internet signal and lead to its loss. It may be useful to turn off or move these devices to improve signal reception.
Hardware problems. Sometimes the reason for the loss of mobile Internet is a malfunction of the device or its incompatibility with the network. Check if your phone or modem has any technical problems. If the problem persists, you may need to contact your carrier for further diagnosis and resolution.
Insufficient carrier coverage. In some cases, the reason for the loss of mobile Internet in a flat may be due to the low coverage of your carrier in the area. Check the carrier coverage in your area to make sure that this is not the cause of the problem. If the coverage is insufficient, you may need to change your carrier or install additional equipment.
It is important to remember that the reason for the loss of mobile Internet may be ambiguous, and solving the problem may require further research and consultation with professionals.
Features of the Problem with Poor Signal Quality
If your flat is located in a remote area or on the upper floors of a multi-story building, the signal from the base station may be weakened. In this case, the solution may be to install a special device to amplify the signal.
Some materials used in the construction of buildings can block a mobile signal. Obstacles in the signal path, such as walls, concrete floors, metal structures, and even glass, can significantly weaken the signal and lead to problems with mobile Internet. In this case, moving to a place with more open space or closer to the window can improve the signal quality.
Interference from other electronic devices, such as microwave ovens, cordless phones, and home routers, can also affect the quality of mobile Internet. It is recommended that mobile devices and routers be placed at a sufficient distance from each other.
If all of the above measures do not solve the problem of poor signal quality, you should contact your mobile operator for advice and assistance. Perhaps there is a problem with the operator’s equipment or various technical nuances that can only be resolved by specialists.
Problems with Mobile Signal Quality Due to Network and Device Settings
One of the reasons for problems with mobile Internet in a flat may be incorrect network and device settings:
Check the mobile network settings on your smartphone or tablet. Make sure that the data transfer mode is set to on. Also check if the “3G only” or “4G only” mode is disabled, as this may limit access to the Internet in some cases. Besides, check if the access point (APN) is set for your service provider.
Check the firewall or antivirus software settings on your device. They may block access to the Internet or certain applications. Make sure that the firewall rules do not prohibit network access for the necessary applications or ports.
If you have problems with mobile Internet on only one device, try rebooting it. Sometimes this can help restore the network connection.
If problems with mobile Internet persist, contact your service provider’s support service. They will be able to conduct a more in-depth diagnosis of your connection and help solve the problem.
Problems with Mobile Signal Due to Frequency Collisions
When mobile Internet stops working in a flat, one of the possible reasons may be a frequency collision. The frequencies on which mobile communications operate are divided into different bands, and each operator has its own allocation of frequency bands.
However, in some cases, frequency collisions are possible, when the signal of one operator intersects with the signal of another operator on the same frequency. This can happen, for example, due to the proximity of base stations of different operators, the use of inappropriate devices, or the presence of interference in the form of other electronic devices, such as a microwave oven.
Frequency collisions lead to a decrease in the quality of communication and data transfer speed. In such cases, the device may switch to another frequency or base station, which may lead to a temporary loss of communication and a decrease in speed.
Final Thoughts
Various factors can cause problems with mobile Internet in a flat, but one of the most common reasons is the materials from which the building is constructed. If you notice that the signal is getting weaker in certain rooms, it is worth considering: what materials can block cell phone signals? Concrete, metal, and glass with a coating can significantly weaken the connection. This problem can be solved by using signal amplifiers, changing the location of the device, or choosing a more suitable operator. If you want to install a mobile signal booster, we recommend paying attention to the British company Uctel.
Read more:
Why Is There No Mobile Internet in the Flat?
